Fix a Frozen Pipe

How to Fix Frozen Pipes?

How to Fix a Frozen Pipe?

As bad as freezing pipes are, burst pipes are even worse.

So when you realize that you have frozen pipes, especially water pipes, then you need to correct the issue before a burst happens. Otherwise, you will have more than pipe issues to worry about.

Granted, not all frozen pipes burst. But, you don’t want to risk that scenario potentially happening, so you need to prevent more pressure on that particular section of pipes.

First, recognize the problem. That means being able to identify that your pipes are frozen. A coating in frost and or even a bulging is a good indication that things are amiss. However, what is the issue is at an unseen part of the plumbing pipes? In that case, faucets not working or toilets not refilling after a flush are also strong indications that the pipes are frozen because water isn’t getting through.

If there is no water coming through any fixture in the house, then either the pipe for the main water service has frozen at the water meter, in the crawl space, or at the water softener in the garage if you are using one. If there is no water coming out of just one fixture, then that means the problem is limited to one area.

Once you find out that your pipes are frozen, then figure out where the problem is. If it there is no water anywhere, then immediately shut off the water main leading into the structure. This needs to be done in order to reduce pressure on the pipes and mitigate things in case the pipes do burst.

Always know where the main water valve is because you will need to know in situations like this.

When you have frozen pipes, the best way to is to thaw it out. But, that can be accomplished in a number of ways.

Once you find out where the problem is, turn on the faucet attached to the pipe. Then, have nearby faucets open to a trickle. Doing this helps water from further freezing because running water is less likely to freeze than standing water.

Running water also, can help thaw out the ice. You don’t want too much pressure to go through the pipe, otherwise, it could burst. However, you want to get the water running as time and movement sometimes can solve the issue for you.

Another option is to add salt to the frozen drains. Salt can lower ice melting points, causing it to melt that much easier. Pour a tablespoon down the drain. Some try to dissolve the salt in boiling water first, then pouring it down the drain. However, this runs the risk of the pipes bursting due to a sudden change in temperature.

Visit the link to fix your commercial or residential property frozen pipes in downriver Michigan.

Source: Adoj.com